Valves, Pumps and Repair Guide
Here's which valve your Outcast or Fish Cat boat has, the wrench, cap, adapter and pump that go with it, and how to fix a leak. Looking for a bladder or a pontoon? See the parts finder.
Which valves do Outcast float tubes and boats use?
| Valve | Boats |
|---|---|
| Boston | Fish Cat 4, Fish Cat 4 Deluxe, Fish Cat Cruzer, Fish Cat 5 Max and Fish Cat Rise float tubes |
| Summit II | OSG float tubes (Super Fat Cat, Cruzer Max, Prowler and Summit), the PAC 800, 900 and 1000, the Fish Cat Panther and 9-IR, the Scout, Stealth Pro, Commander and Clearwater frameless boats, and the Striker raft |
| Leafield C7 | The PAC 1200, the Fish Cat 13, and the PAC 1300, 1400 and 136DD rafts |
| Seat tube valve | Inflatable seats on the Fish Cat 4 Deluxe and Super Fat Cat |
| Summit 1 | Older Outcast boats |
Your boat's Specifications tab names its valve and how many it has.
What is a Boston valve?

A Boston valve is a two-piece, one-way valve. The base screws into the tube and a cap screws onto the base. It moves a lot of air, so a float tube fills and empties fast. Fish Cat float tubes have two, one for each air chamber.
To pump through a Boston valve, put a Boston valve adapter on your pump hose. It fits any standard hand pump or 12V inflator.
Summit and Leafield valves


- Summit II has a blue ring, so it's easy to tell apart. It's the standard valve on OSG float tubes, the PAC 800, 900 and 1000, and our frameless boats.
- Summit 1 is the original Summit valve, found on older Outcast boats. The Summit wrenches fit both.
- Leafield C7 has a low-profile cap that also works as a second air seal. Its working parts sit in the outer section of the valve, so you can clean or repair it on the water.
- Leafield D7 is another Leafield valve. It takes the same wrench, cap and adapter as the C7.
Wrench, cap and pump adapter for each valve
| Valve | Wrench | Cap | Pump adapter |
|---|---|---|---|
| Summit II | Plastic Summit & Halkey-Roberts wrench, or the steel Summit wrench | Summit 2 cap | Summit 2 adapter (blue ring) |
| Summit 1 | Same as Summit II | Summit 1 cap | Summit 1 adapter |
| Leafield C7 or D7 | Leafield C7/D7 & A6 wrench | Leafield C7/D7 cap | Leafield C7/D7 adapter |
| Leafield B7 | Leafield B7 & A6 wrench | Leafield B7 cap | Leafield A7/B7 adapter |
If you lose the cap on an inflatable seat valve, the tube valve cap fits the seat valves on every Outcast boat with inflatable seats.
The plastic Summit wrench also fits Halkey-Roberts New Short valves, but not Halkey-Roberts Old Short or Long valves. The steel Halkey-Roberts & Summit wrench fits Halkey-Roberts 690 NSBV and Summit valves.
The 2" vinyl tube adapter connects your pump hose to the Leafield, Summit and Halkey-Roberts adapters. The AIR DADDY universal adapter fits Leafield, Halkey-Roberts, Boston and stem valves, and works with a tire pump, a low-pressure compressor or a hand pump.
Which pump should I use?
- 12V inflators. The Outcast Hurricane and the NRS Blast fill a boat to 2 psi. The Hurricane runs hands-free with an on/off switch, comes with valve adapters and also deflates the boat.
- K-Pumps. Hand pumps that come with a storage bag, lubricant and a set of inflation adapters, with a 2-year warranty. The K-Mini and K-40 are compact, and the K-100, K-200 and K-400 move more air for bigger boats. The K-40 and K-400 are two-stage pumps.
- Double action hand pump. Pushes air on the up stroke and the down stroke.
- Foot pump. Made for float tubes and small pontoon boats. Add a vinyl tube adapter to its basic adapter and it fits most valves.
- 4" barrel pump. For inflating and topping off rafts.
How much air?
- Press the tube with your thumb. A fully inflated boat gives about 1/4". If it gives more, add air. If it doesn't give at all, let some out.
- Floor bladders have a pressure relief valve that starts letting air out at 2.5 psi.
- Let some air out before you haul the boat.
- The Leafield pressure gauge reads 0 to 8.5 psi on Leafield valves. It doesn't fit Summit or Boston valves.
- Watch how we do it: Super Fat Cat inflation and pontoon boat inflation.
My valve leaks. What now?
Tighten the valve with its wrench first. The same wrench takes the valve out, so you can clean it or put in a new one. On a Leafield C7 you can reach the working parts from the outside without pulling the valve. Pack a spare valve for long trips. The Pontoon Emergency Kit has a spare Summit 2 valve.
If air still leaks where the valve meets the bladder, call us at (800) 966-0976. Valves are covered by the Outcast warranty.
How do I patch a bladder?
Small holes and tears in a bladder can be patched with Tear-Aid. It's peel-and-stick with no heat or tools, and it's clear, so it works on any color. Pick the type by what your bladder is made of. Your boat's Specifications tab lists it as AIREcell Material.
- Urethane bladders (OSG float tubes, PAC pontoon boats, OSG frameless boats and our rafts): Tear-Aid Type A.
- Vinyl bladders (Fish Cat float tubes, Fish Cat pontoon boats and the Scout): Tear-Aid Type B, made for vinyl and PVC.
For a glued patch, or to add a D-ring, use Clifton LA 4123, a one-part contact glue for PVC and urethane. A 4 oz can covers about 1 to 1.5 square feet of patch with two thin coats, and the brush is in the lid. D-ring patches come in oval, round and trapezoid shapes and several colors.
Repair kits
- Outcast Summit 2 Repair Kit: a Summit valve wrench and adapter, a vinyl tubing adapter, PVC, clear urethane and urethane-coated nylon strips, a Tear-Aid Type A roll and patches, a needle, thread, sandpaper and alcohol prep pads.
- Outcast Leafield Repair Kit: a Leafield C7/D7 wrench and adapter, a vinyl tubing adapter, repair cord and a needle, sandpaper, a Tear-Aid Type A roll and patches, and an alcohol prep pad.
- Pontoon Emergency Kit, for Fish Cat and Discovery pontoon boats: a spare Summit 2 valve and adapter, a vinyl tube adapter, two Springer clips, two seat bolts and five Tear-Aid patches.
The repair kits don't include glue, so add a can of Clifton LA 4123.
Bigger damage
For long tears, seam damage or a fix you'd rather leave to us, send the boat in. Call (800) 966-0976 for a return authorization number, then follow the steps on Returns for Repair or Replacement. You can also take it to one of our service centers. Check the Outcast warranty first. Repairs the warranty doesn't cover are done for a small fee, and you pay shipping both ways.




